wie kann ich meinen Rip auf Fehler überprüfen (Seite 2 von 2)

ubuntu@ubuntu:~$ cdparanoia -A -d /dev/cdrom
cdparanoia III release 10.2 (September 11, 2008)

Using cdda library version: 10.2
Using paranoia library version: 10.2
Checking /dev/cdrom for cdrom...
    Testing /dev/cdrom for SCSI/MMC interface
  SG_IO device: /dev/sr0

CDROM model sensed sensed: MATSHITA BD-CMB UJ-120 1.00

Checking for SCSI emulation...
    Drive is ATAPI (using SG_IO host adaptor emulation)

Checking for MMC style command set...
    Drive is MMC style
    DMA scatter/gather table entries: 1
    table entry size: 524288 bytes
    maximum theoretical transfer: 222 sectors
    Setting default read size to 27 sectors (63504 bytes).

Verifying CDDA command set...
    Expected command set reads OK.

Attempting to set cdrom to full speed...
    drive returned OK.

=================== Checking drive cache/timing behavior ===================

Seek/read timing:
    [78:33.14]:   39ms seek, 0.61ms/sec read [21.8x]                
    [70:00.00]:   54ms seek, 0.64ms/sec read [20.7x]                
    [60:00.00]:   42ms seek, 0.68ms/sec read [19.5x]                
    [50:00.00]:   49ms seek, 0.74ms/sec read [18.0x]                
    [40:00.00]:   59ms seek, 0.80ms/sec read [16.7x]                
    [30:00.00]:   51ms seek, 0.89ms/sec read [15.1x]                
    [20:00.00]:   56ms seek, 1.00ms/sec read [13.3x]                
    [10:00.00]:   50ms seek, 1.15ms/sec read [11.6x]                
    [00:00.00]:   54ms seek, 1.43ms/sec read [9.3x]                

Analyzing cache behavior...
    Approximate random access cache size: 8 sector(s)              
    Drive cache tests as contiguous                          
    Drive readahead past read cursor: 2872 sector(s)               
    Cache tail cursor tied to read cursor                     
    Cache tail granularity: 1 sector(s)                     
    Cache size (considering rollbehind) too small to test cache speed.

Drive tests OK with Paranoia.